Schoolhouse pendant light – A schoolhouse pendant light hanging from the ceiling by a cord or chain. Installation concept is the same as a flush-mounted light, located toward the ceiling. In both cases, connect the two electric wires plus a ground wire for the house circuit. The difference is that a schoolhouse pendant light has two parts with a canopy, which goes against the ceiling. Follow the packaging instructions on how to assemble the light that designs vary.
Change a schoolhouse pendant light; Turn off power to the lights on the house fuse box or circuit breaker. Remove the screws holding the old fixture in place using a screwdriver. Disconnect the wires behind it, so you can pull the fixture free. You should be left with an exposed electrical box and three visible wires – white, black and bare copper. Hold the mounting bracket from your new fixture up to the electric field. Secure it with the screws. Twist bare copper grounding around green ground screw on the mounting bracket. Tightening the screw.
12 Picture Gallery: To change a Schoolhouse Pendant Light
Pick up the new schoolhouse pendant light as instructed; connect the power cord and cables between the fixture that will contain the bulb and canopy that will go against the ceiling. Carrying it up your ladder. Keep the canopy in the vicinity of the electric field. Use wire nuts to connect the white and black wires from the canopy to the corresponding wires from the electrical box, twist the nuts of the pair wires. Set the canopy up to the mount, pushing the wires in the box. Secure it with the screws, so the fixture hanging down from it.
This post topic: Pendant Light