Bunk Bed Slide – First, measure the bedroom to determine the amount of space you have for a slide. You can mount the slide on the side or end of the upper bunk. Measure the height of the upper bunk. Buy a prefabricated plastic slides of appropriate length. Adjust the bunk bed height, if necessary.
Second steps to make bunk bed slide, drill two holes through the wooden sides of the upper bunk frame in the specified size with slide -producenten. Drill matching holes through the slide top lip. If the slide upper lip already has mounting holes, use them as a template to mark the places to drill. Bolt the top of the slide safely to the bed frame.
12 Picture Gallery: Make Bunk Bed Slide
Third, if your bunk beds have metal angle frames, you need to bolt a piece of 2 -by- 4 timber frame bed to keep the bunk bed slide. Cut timber to be longer than the slide is wide. Drill two holes through the timber and the bed frame and bolt 2-by-4 sections to the bed frame. Bolt the top of the slide timber. Fourth, attach the lower end of the carriage by running two wood screws through the lower lip in the floor. You do not need to remove carpets or flooring.
This post topic: Bunk Beds