How To Make Deadpool Body Pillow

Nov 28th
Style Deadpool Body Pillow
Style Deadpool Body Pillow

How To Make Deadpool Body Pillow – Pillowcase sewing is not hard and you can easily create more personal the living room or bedroom with. The deadpool cover with envelope-opening is the good ideas to sew on sewing lessons. We are going to make a cushion cover for a cushion of 100 x 40 cm. We adhere to both sides seam allowance of 2 cm. For the front side of the cushion so we cut a piece of fabric of 104 x 44 cm.

Next steps for make deadpool body pillow are at the back we put an envelope opening. Before we cut a piece of fabric of 75 x 44 and a piece of 85 x 44 cm. That way we have enough overlap to allow pretty close the opening. We start by sewing the back. The short piece is above the long piece down. Sewing with the zigzag stitch along the top of the lower piece of fabric. And along the bottom of the top piece of fabric. Now we’ll make the seam. Remove the top piece of fabric; fold the seam to 2.5 cm. Pin in place. Sew a straight stitch seam.

12 Picture Gallery: How To Make Deadpool Body Pillow

RELATED TOPIC:  How to Use a Pregnancy Pillow: Check This Out!

Next steps for make deadpool body pillow is Take the lower fabric and sew also a seam of 2.5 cm to. Now take the piece of fabric to the front. Put it right side up. Put here first the upper part of the back neatly right. Pin in place. Then put the lower piece of fabric on the rest. Pin this neatly fixed, especially on overlaps. Now you can go all sewn together. Do this 2 cm. Cut the corners. Thus the corners of your deadpool body pillows tighter. Sew still with the zigzag stitch around your entire pillow. Cut the wires. And the best: turn inside your pillow! A cushion form and you’re done!

This post topic: Body Pillow

Other Interesting Things About Body Pillow Photos